Pompe à eau SKF VKPA 88913
Ref Constructeur :
BMW
- 64116951549
- 64116978627
- 64119197085
Réf. Equivalente :
DAYCO :
- DEP1036
DOLZ :
- EB523A
FEBI BILSTEIN :
- 176341
GATES :
- 41523E
HEPU :
- AP8222
METELLI :
- 25-0038
PIERBURG :
- 7.02078.39.0
RUVILLE :
- 501671
SALERI :
- PE1671
SWAG :
- 33103484
VEMO :
- V20-16-0006
Informations:
Do not start the engine without coolant as there is a highrisk of damaging the sensitive dynamic seal of water pumpnever reuse the old coolant. Contaminants are flushed outwith the coolant and should not be refilled into the coolingsystem. In addition, the additives contained in the coolantevaporate after a while. Therefore, always use new coolant!Always use the coolant approved by the vehicle manufacturer!Vent the cooling system according to manufacturer'srecommendations.Take special care with cooling systems with electricor switchable coolant pumps.On these vehicles, venting may have to be initiatedby a diagnostic device via the engine management system.Drain as much coolant as possible. Dirt particles arefrom the cooling system together with the coolant.SKF always recommends flushing the cooling systembefore installing a new coolant pumpto avoid pre-damaging the new coolant pump.Use a vacuum tool to fill the cooling system
-
BMW
-
BMW X5 (E70)
- xDrive 30 d (2008/10−2010/03)
- xDrive 40 d (2010/09−2013/06)
- 4.8 i xDrive (2006/10−2008/09)
- 3.0 d (2006/12−2008/09)
- 3.0 sd (2007/10−2008/09)
- xDrive 48 i (2008/10−2010/03)
- xDrive 35 d (2008/10−2013/07)
- M 50 d (2011/08−2013/06)
-
BMW X6 (E71, E72)
- xDrive 30 d (2008/04−2010/03)
- xDrive 40 d (2009/07−2014/06)
- xDrive 35 d (2008/01−2010/03)
- M 50 d (2011/08−2014/06)
-
BMW X5 (F15, F85)
- xDrive 30 d (2013/08−2018/07)
- xDrive 40 d (2013/12−2018/07)
- sDrive 25 d (2013/12−2018/07)
- xDrive 25 d (2013/12−2015/07)
-
BMW X6 (F16, F86)
- xDrive 30 d (2014/08−2019/07)
- M 50 d (2014/08−2019/07)
- xDrive 40 d (2014/12−2019/07)
-
BMW X5 (E70)
Aucun avis sur ce produit